ECE 101 Introduction to Engineering I
Introduction to the engineering profession. Emphasizes engineering problem-solving techniques and the ethical and societal responsibility of engineers, including introduction to the use of computers, freehand sketching, and an introduction to engineering design. Focuses on engineering methods, computer-aided design, and mathematical modeling using software applications (e.g., MATLAB, Mathematica). Team work skills, research methods, professional report writing, and public presentation techniques are taught. Engineering analysis, design, and reporting are required during a semester project.
ECE 251 Digital Logic Design (4)
Fundamental and advanced concepts of digital logic. Boolean algebra and functions. Design and implementation of combinatorial and sequential logic, minimization techniques, number representation, and basic binary arithmetic. Logic families and digital integrated circuits and use of CAD tools for logic design. Three hours of lecture and two hours of laboratory per week.
ECE 252 Computer Organization and Microprocessors (4)
Organization of computer systems: processor, memory, I/O organization, instruction encoding and addressing modes. Introduction to microprocessors and microcontrollers. Design of hardware and software for microprocessor applications. Assembly language programming. Microprocessor system case studies. Three hours of lecture and two hours of laboratory per week. Prerequisite: ECE 251.
ECE 260 Electric Circuits (4)
Units and definitions. Ohm’s Law and Kirchhoff’s Laws. Analysis of resistive circuits. Circuit analysis techniques: Nodal and mesh methods, Norton and Thevenin theorems, maximum power transfer. Capacitance, inductance and the natural and step response of RL, RC and RLC phasor analysis of AC circuits. 3 hours of lecture and 2 hours of lab/activity each week. Laboratory will utilize hands-on activities to reinforce concepts presented in the lecture. Prerequisite: PHY 201T, PHY 201L and Pre/corequisite: MAT 230 or MAT 260.
ECE 281 Electrical and Computer Engineering Seminar I (1)
Overview of the fields of electrical engineering and computer engineering. Various sub-fields within EE and CoE will be explored, with emphasis on how they are interrelated. Issues relevant to careers in EE and CoE (e.g., typical tasks performed by EEs and CoEs) will be explored.
ECE 301 Signals and Systems (4)
Provides an introduction to continuous-time and discrete-time signals and linear systems. Topics covered include time-domain descriptions (differential and difference equations, convolution) and frequency-domain descriptions (Fourier series and transforms, transfer function, frequency response, Z transforms, and Laplace transforms). Three hours of lecture and two hours of laboratory per week. Prerequisites: MAT 230 and a grade of C or better in ECE 260.
ECE 315 Electronics I (4)
Introduction to electronics concentrating on the fundamental devices (diode, transistor, operational amplifier, logic gate) and their basic applications; modeling techniques; elementary circuit design based on devices, laboratory exercises. Three hours of lecture and two hours of laboratory per week. Prerequisite: Grade of C or better in ECE 260, Corequisite: ECE 251.
ECE 323 Electromagnetics (3)
Fundamentals of electromagnetic fields, Maxwell’s Equations, plane waves, reflections. Application to transmission lines, antennas, propagation, electromagnetic interference, electronics packaging, wireless communications. Prerequisite: ECE 301 and MAT 253.
ECE 332 Semiconductor Devices (3)
Basic theory of semiconductors, p-n junctions, bipolar junction transistors, junction and MOS field effect devices, device design and modeling, fabrication. Prerequisites: PHY 201T, PHY 201L, CHE 110T and CHE 110L or equivalent.
ECE 351 Digital Systems Design (4)
Synchronous sequential circuit design. Algorithmic state machine method; state reduction; control-datapath circuit partitioning. Design of sequential arithmetic circuits. Memory interfacing; bus-based design. Specification and synthesis of digital systems using hardware description language and implementation using programmable logic devices. Simulation, analysis, testing, and verification of digital systems. Three hours of lecture and two hours of laboratory per week. Prerequisite: ECE 251.
ECE 352 Computer Architecture (3)
RISC machines and instruction set architectures, computer arithmetic, performance evaluation, single cycle and multi-cycle datapaths, pipelined architecture, static and dynamic scheduling, instruction-level parallelism, advanced pipelining, superscalar and super-pipelined processors, memory hierarchy and organization, I/O, compiler issues. Pre-requisite: ECE 252.
ECE 359 Computer Networks (3)
Introduce principles and practices in computer and communication networks. Emphasis is on the design, implementation, and management of IP backbone networks (the Internet), wired/wireless LAN’s , and mobile communication networks. Topics include: major network implementations, Internet protocols, LAN standards, network elements (switches, routers, bridges, and gateway), EMS/NMS, network security, and other current research topics. Prerequisite: MAT 370 or equivalent.
ECE 360 Electrical Circuits II (4)
Review of AC circuits. Study sinusoidal steady-state analysis, AC power analysis, three-phase circuits, magnetically coupled circuits, and frequency response of AC circuits. Advanced techniques for network analysis will also be introduced. Prerequisite: C or better in ECE 260.
ECE 361 Control Systems (4)
Introduction to analysis, design and modeling of control systems. LaPlace transforms, transfer functions and transient analysis. Concepts of stability; polar and log-frequency plots. Numerical simulation and design of simple control systems. Three hours of lecture and two hours of laboratory per week. Prerequisite: ECE 301.
ECE 377 Communications Systems (3)
Fundamentals of communications systems. Modulation and demodulation methods. Characteristics of modern analog and digital communications methods. Prerequisite: ECE 301. Corequisite: MAT 370
ECE 382 Seminar II (1)
Provides an overview of the professional aspects of the fields of Electrical Engineering and Computer Engineering. Topics to be covered include: typical career paths in ECE, engineering ethics, resume writing and job search techniques, preparing for graduate school, professional engineer license, etc.
ECE 387 Design Lab (3)
Students will complete a series of assigned design projects that rely on background in the areas of microprocessors, electronics, and signals & systems. Lecture will focus on various aspects of the design process as well as discussion of component characteristics. Prerequisite: ECE 252, ECE 301, and ECE 315.
ECE 402 Signal Processing (3)
Discrete time and frequency analysis of linear systems. Random signals, correlation functions, power spectrum, and design of elementary digital filters. Prerequisite: ECE 301.
ECE 403 Deep Learning for Signal Processing Applications (3)
Introduce the concept of deep learning using software libraries for neural networks and explore deep learning applications for signal detection, identification and prediction as well as denoising and enhancement, such as automatic colorization for grayscale photos. Three hours of lecture. Prerequisite: ECE 301 Signals and Systems or equivalent.
ECE 416 Analog Circuit Design (3)
Active and passive circuits, bias point and small signal analysis. Frequency response and transient characteristics of electronic circuits. Feedback and stability. Electronic circuit design and system applications (multistage amplifiers, active filters, etc.), numerical simulations. Technical Elective. Prerequisite: ECE 315
ECE 460 Power Systems Engineering (3)
Power Transformers and transmission line parameters. Solutions to power transfer equations. Maximum power transfer. Symmetrical faults calculations and components. Computer analysis methods for power systems. Prerequisites: ECE 360.
ECE 462 Control Systems II (3)
Conventional and state variable techniques for the analysis and design of analog and digital control systems, z-transform, sampled data systems, discrete state variable techniques, numerical simulation, and computer-aided design of control systems. Prerequisite: ECE 361.
ECE 487 Senior Project I (4)
Design projects in cooperation with local industry and other external clients. Specifications, proposal, time schedule, paper design. Periodic design reviews with client, written and oral progress reports, final presentation. Prerequisite: ECE 387 and senior standing.
ECE 488 Senior Project II (4)
Continuation of EE 487. Prototype fabrication and test. Demonstration and documentation of functioning system delivered to client. Prerequisite: ECE 487.
ECE 490 Special Topics in Electrical and Computer Engineering (2-4)
An in-depth study of topics selected from and based on new developments in communications technology and related areas. Topics may include areas of secure communications, mobile communications, image transmission and optical signal processing, computer-aided design, analysis of communications links and networks and integrated services digital network standards.
ECE 491 Independent Study/Electrical and Computer Engineering (Variable 1-4)
Extensive study and research on a particular topic of student interest under the supervision of a faculty member. The student is required to submit a written proposal which includes a description of the project, its duration, educational goals, method of evaluation, and number of credits to be earned. Prerequisites: Matriculated students only, permission of instructor and dean of subject area.